MIL-ST0-1548G
SAE INTERNATIONAL
SAE AS5877 0etailed Specification for Aircraft Pressure Refueling Nozzle
(0o0 Adopted)
(Copies of these documents are available online at https://www.sae.org or from SAE International, 400
Commonwealth 0r., Warrendale, PA USA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein (except for related specification sheets), the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. 0EFINITIONS
3.1 0efinitions applicable in this standard. The definitions for terms used in this standard are in accordance with ATA Specification 103 and the IATA Joint Into-plane Guidelines (JIG 1), with the following additional terms noted herein.
3.2 Full flow monitor cartridges. Fuse-type or fuel monitor elements, which remove free water and solid contaminants in the fuel. As the elements retain solids and water through absorption, fuel flow is restricted or shutoff.
4. GENERAL REQUIREMENTS
4.1 Type I and Type II. Receipt, storage, and issue of aviation products shall comply with ATA Specification 103 or IATA Joint Into-plane Guidelines (JIG 1) respectfully, except as noted herein.
4.1.1 0efueled product. 0efueled product from other than U.S. Government aircraft shall not be used to refuel U.S. Government aircraft. Product defueled from U.S. Government aircraft may be returned to an authorized user and shall meet the defueled product quality criteria in Table I.
TABLE I. Defueled product quality criteria.
Property |
Requirement |
Test Method |
0ensity at 15 °C (or API Gravity) Particulate contamination (1) Particulate content before filtration, or: (2) Particulate content after filtration into plane, or: (3) Color rating Conductivity Without conductivity additive With conductivity additive Water content (into plane) Appearance Flash point 1 |
0.775-0.840 kg/L (37-51) 1.0 mg/L, max 0.5 mg/L, max A1,A2,B1,B2,G1, or G2 10 pS/m, max 50-700 pS/m 15 ppmv, max Clear and Bright 38 °C (100 °F), min |
ASTM 01298 or 04052 ASTM 05452 ASTM 05452 ASTM 02276 ASTM 02624 ASTM 02624 See JIG 1 or ATA 103 Visual ASTM 056, 093, or 03828 |
Notes: 1. ASTM 056 may give results up to 1°C (2°F) below the ASTM 093 results. ASTM 03828 may give results up to 1.7°C (3°F) below the ASTM 093 results. |
||
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business