FED-STD-791D
240 grit
9. Silicon-carbide grains, 150 mesh
10. Cotton, absorbent
11. 1,1,1-trichloroethane (ASTM D
4126)
12. Laboratory filter paper
13. Naphtha, aromatic (TT-N-97)
5309.5
Corrosiveness of greases (copper
1.Copper strip , soft tempered ,
annealed
strip, 100° C
2. n-Hexane (ACS grade)
3. Acetone (ACS grade)
4. Fine silicon carbide or aluminum
grit paper
5. 240 grit silicon- carbide paper
6. 150 mesh silicon carbide paper
5321.2
Corrosion of lead by lubricating
1. Test panel, Chemical-lead
oils
(ASTM B 29-55 or equal)
2. Test panel, copper , Electrolytic
(ASTM B 152/152M)
3. Naphtha, petroleum (TT-N-97)
4. Acetone (ASTM D 329)
5. Steel wool
6. Pads, Absorbent- cotton
1. Naphtha, aliphatic (TT-N-95)
5329.2
Corrosion Protection (Humidity
2. Methyl alcohol (O-M-232)
Cabinet)
3. Silica sand, white, dry, sharp,
(size IAW ASTM E 11)
4. Test panelsFS 1009 steel,
fabricated from open-hearth, "
killed `' type low carbon, No. 4
, soft temper, cold rolled sheet
or strip conforming to QQ-S-
698
5. Surgical gauze
5331.1
Corrosion protection of steel
1. Steel specimen, carbon steel
against sulfurous acid salt spray
conforming to fs 1010
by solid film lubricants
2. Synthetic sea water sulfurous
acid test solution (formula
ASTM D 1141)
3. Aluminum oxide cloth 240 grit
4. 1,1,1- trichloroethane (MIL-T-
81533)
5. Distilled water (ASTM D 1193,
type 111)
6. Sulfurous acid, ACS
454
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business