FED-STD-791D
6. H-515-hydraulic fluid
3013
Determination of particulate
1. Isopropyl alcohol , reagent
contamination in synthetic turbine
grade
engine lubricants
2. Petroleum ether ,30C to 60C
boiling range, reagent grade
3110.1
Fatty oil in cutting fluids by
1. Fatty oil
infared spectrophotometry
2. Mineral oil, 0.0-15%
3180.2
Sulfur in cutting fluids
1.Copper powder, ACS
2.Nitric Acid ,5 percent
3.Acetone,ACS
4.Isooctane,Knock test grade
5.Filter paper Whatman No . 4 and
42 or equivalent
6. Firing wire iron approximately26
B and S gage
7. Blue litmus paper
8. Materials required for ASTM D
129
3201.7
Emulsion (petroleum and
1.Emulsifying agent (distilled
petroleum like products
water, sodium chloride solution or
synthetic seawater) as required by
the specification.
3205.3
Emulsion (soluble cutting oils)
1. Distilled water
3403.2
Compatibility of turbine
1. Referee lubricant
lubricating oil
2. 1,1,1-trichlroethane
3. Cleaning solution ,glass
(concentrated sulfuric acid
saturated with potassium or
sodium dichromate , technical
grade)
3410.1
High temperature deposit and oil
1.Lubricating oil, qualified under
degradation characteristics of
MIL-L-23699
aviation turbine oils
2.Dry cleaning solvent, (MIL-PRF-
680B, Type 1)
3.No.400 emery paper
4.No. 30 grit aluminum oxide
5.Bi solvent; Isopropyl alcohol:
Acetone
3411.1
Thermal stability and corrosivity
1. Toluene, reagent grade
of air craft turbine engine
2. Acetone, reagent grade
lubricants
3. Nitric-sulfuric mixture,
approximately 1:10
4. Abrasive paper, silicone
carbide, 240 grit
5. Steel specimens,QQ-S-698 mild
447
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business