MIL-STD-1518 Storage, Handling, And Servicing Of Aviation Fuels, Lubricating Oils, And Hydraulic Fluids At Contractor FacilitiesThis standard establishes the minimum performance and quality requirements for the storage, handling, and servicing of aviation fuels, lubricating oils, and hydraulic fluids at contractor owned/operated aircraft maintenance facilities.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25

ITEM

SAMPLE POINT

TEST

TEST LIMITS

SAMPLE FREQUENCY

2.

Tank Truck/Car Receipts.

2a.

Receiving header upstream of any filtration.

Solids/0P.

Color and particle assessment method (ASTM 02276

Appendix 3)

See Note 1.

One sample daily from one T/T or T/C from each supplier.

FSII.

(ASTM 05006) (when additized)

See TABLE II.

Conductivity. (when additized)

See TABLE II.

Flash Point.

See TABLE II.

2b.

0ownstream of filter separator if installed.

Solids/0P.

Color and particle assessment method (ASTM 02276

Appendix 3)

See Note 1.

Every 7 days or next receipt.  Take one downstream sample in conjunction with any one of the upstream

samples, compare the results.

3.

Storage tanks.

Conductivity. (ASTM 02624) (when additized)

50 - 700 CU.

Every 14 days.

FSII.

(ASTM 05006)

(when additized)

See TABLE II.

4.

Refueling truck fillstand.

0ownstream of filter separator.

Solids/0P.

Color and particle assessment method (ASTM 02276

Appendix 3)

See Note 1.

Every 7 days.  If fillstand is inactive for more than one week, sample

during the first refueler fill.  Sample during first refueler fill after F/S elements are changed.

Water.

(ASTM 03240)

10 ppm.